DMR Digital Repeater 1U/IP Multisites
RPT-08N
DMR Digital Repeater
RPT-08N is a high-end professional DMR digital repeater 1U, which can be wall-mounted or installed in a standard 19-inch rack. RPT-08N is fully complying with the ETSI-TS 102 361 standard, supports digital and analog dual-mode protocols, and supports multiple repeater IP Internet channels. RPT-08N and co-frequency simulcast network, providing up to 40 W (UHF) and 45 W (VHF) powerful output. RPT-08N greatly expands the coverage of the Tier II system. RPT-08N allows up to 32 repeaters to be linked together through IP networks to make repeat calls and send data messages over a wide area. RPT-08N software upgrade has DMR Tier III trunking channels function, which can realize the communication needs of large-capacity users. Other features of RPT-08N are including mixed mode, analog, DMR digital and co-channel simulcast, providing smooth transition from analog operation to digital operation.
The number of users of TDMA systems that can use the same channel has doubled. This is an important solution due to limited frequency resources and reduces the cost of system terminal equipment and frequency usage.
RPT-08N Digital Repeater is the only way that you need to choose.
* For more system packaging solution, please download the RTS-08 brochure from "File download" below.
Features
- 19 Inches, 1U Cabinet Size Design (super slim) with Power Supply Inside.
- 100% Continuous Duty Cycle with 50W High Power Output.
- Mixed Mode Multi-site IP Connect to Support Digital and Analog Repeaters.
- Upgrade to DMR Trunking and Simulcast Base station Transceiver.
- Can be upgraded to DMR Tier II simulcast base station transceiver by software license.
- The unique designed mixed mode multi-site IP connect to support digital and analog repeaters up to 64 sites which allows wide area coverage and cross bands communication.
- DMR Digital / Analog / Mixed Mode Operation.
- Multi-Site IP Connectivity.
- Support Single Frequency Repeater.
- Cross-Brand Compatibility.
- 45 / 50 Watts of Power UHF / VHF.
- 100% Duty Cycle.
- Compact 1U Design.
- Built-In Power Supply.
Specifications
General
Frequency | VHF: 136 - 174MHz UHF: 400 - 470MHz, 450 - 520MHz |
---|---|
Emission masks | 11K0F3E@12.5K, 16K0F3E@25K 12.5KHz (Data only): 7K60FXD 12.5KHz (Data + voice): 7K60FXE |
Power Supply | DC 13.6V ± 15% AC 100 - 240V 50/60Hz |
Current | <1A (Standby) |
<6A (Transmit@25W) | |
<10A (Transmit@50W) | |
Frequency Stability | ± 0.5 ppm |
Channel Bandwidth | 12.5 / 20 / 25KHz |
Channel Capacity | 128 |
Weight | 7.6kg |
Dimensions | 44 x 483 x 375mm |
Transmitter
RF Output Power | 45/50W 20W |
---|---|
Modulation Limiting | 5KHz @25KHz 4KHz @20KHZ 2.5KHz @12.5KHz |
FM Hum and Noise | 48dB @25KHz 46dB @20KHz 43dB @12.5KHz |
Conducted / Radiated Emission | -36 dBm ≤ 1GHz, -30 dBm ≥ 1GHz |
Adjacent Channel Power | -60dBc |
Audio Response | +1 / -3dB |
Audio Distortion | ≤ 3% |
Digital Vocoder Type | AMBE + 2™ |
Digital Protocol | ETSI-TS102 361 -1, -2, -3, -4 |
Receiver
Sensitivity | Analog 0.22μV (12dB SINAD) |
---|---|
Digital 0.22μV / BER 5%, 0.35μV / BER 1% | |
Adjacent Channel Selectivity | 60dB @12.5kHz, 70dB @25kHz |
Intermodulation | TIA603C: 70dB, ETSI: 65dB |
Hum and Noise | 48dB @25KHz, 46dB @20KHz, 43dB @12.5KHz |
Audio Response | +1 / -3dB |
Audio Distortion | ≤ 10% @ 0.5W |
Conducted Spurious Emission | -57dBm |
Environmental
Operating Temperature | -30 - +60°C |
---|
(All stated specification are subject to change without notice or obligation)
- File Download
DMR Digital Repeater 1U/IP Multisites | Wire Harness & Cable Assembly Manufacturer | Rexon
Based in Taiwan since 1990, Rexon Technology Co., Ltd. has been a manufacturer of two-way radios. It's main two-way radios include, DMR Digital Repeater 1U/IP Multisites, Walkie Talkie, Aviation Radio, Professional Two-Way Radio, FRS Radio, DMR Two-Way Radio, Amateur Two-Way Radio, Two-Way Mobile Analog Radio, Marine VHF Two-Way Radio, Radio Accessories, Blue Tooth Products for Two-Way Radio, Electronic Control Board, PCB Assembly, Cable Assembly, Wire harnessand total solution for PCB Assembly with wire harness. We provide the whole PCBA procedures include SMT, DIP, Solder, assembly, and test finished products until shipments.
Established in 1990, Rexon Technology Co., Ltd has been in radio & wireless device manufacturing business for 30 years. Focusing on product design with high quality standards, we have built up strong OEM / ODM capabilities. In 2009, Rexon starts the new business-PCBA. We provide the whole PCBA procedures include SMT, DIP, Solder, assembly, and test finished products until shipments. in 2019, Rexon starts the new bussiness -Wire harness and cable assembly. Besides RF capability, our professional R&D team is experienced for customized software, hardware, and mechanical designs. Their competencies provide strong supports for comprehensive solutions for any technical demands.
Rexon has been providing customers with high quality two-way radio products since 1990, both with advanced technology and 30 years of experience, Rexon ensures that each customer's needs are met.