PSU | Taiwan Radio & Wireless Device Manufacturer | Rexon

Two-way Radio - Aviation Power Supply RPS-100 | Rexon has factory manufacturing certification of DMR Association and strive for developoing radio products. We also provide the whole PCBA procedures include SMT, DIP, Solder, assembly, and test finished products until shipments, and our wire processing products include MINI DIN connector wiring, sensor wire sets, solderless terminal wire sets, signal wire wiring and other related wire processing and assembly.

Aviation Power Supply - Two-way Radio - Aviation Power Supply RPS-100
  • Aviation Power Supply - Two-way Radio - Aviation Power Supply RPS-100

Aviation Power Supply

RPS-100

PSU

The two-way Radio- Aviation Power Supply RPS-100 provides a highly stable output and is designed for use with the Rexon Technology radios and could be also embedded in radio cabinet.

RPS-100 power supply can be plugged into a standard wall outlet and can be input from a full range of 90VAC to 264VAC, generating a clean and reliable power supply that is highly filtered to suppress RFI (Radio Frequency Interference).

RPS-100 power supply unit is equipped with a detachable power cord and features overcurrent, short circuit and overvoltage protection. There is also a charging output with a lower current rating to provide a backup power source input for easy access to the system. RPS-100 is an excellent radio accessory that you must to buy!

Features
  • Advanced Switching Power Supply Technology.
  • Light weight and small size.
  • Advanced circuitry minimizes output voltage ripple and RFI.
  • Input voltage can be set at 90VAC ~ 264VAC 50/60Hz.
  • UL listed to both USA & Canadian safety standards.
  • Internationally versatile full range of input.
  • Type of protection: short circuit / overload / over voltage.
  • Battery low voltage protection / battery reverse polarity protection through fuse.
  • AC Ok and battery low voltage relay pull-in signal output.
  • 100% full load aging.
  • Portable body structure, moving quickly.
  • Input voltage range 90VAC ~ 264VAC 50/60Hz, with battery charging and uninterruptible power.
  • Power switch with light for instant display of supplier status.
  • Can be processed with the customer's requirements.
Specifications
OutputDC Voltage13.8V
Rated Current7.6A Charger: MAX 4A
Current Range0 ~ 11.6A
Rated Power160W
Ripple & Noise (Max.)150mV-p-p
Voltage Tolerance± 1.0%
Line Regulation± 0.5%
Load Regulation± 0.5%
InputVoltage Range90 ~ 264VAC
Frequency Range47 ~ 63Hz
Power Factor (Typ.)PF ≧ 0.95/230VAC PF ≧ 0.98/115VAC (at full load)
Efficiency (Typ.)88%
Ac Current (Typ.)2.5A/115VAC, 1.5A/230VAC
ProtectionOverload2.5A/115VAC, 1.5A/230VAC
Over Voltage14.49 ~ 18.63V
Battery Cut Off10 ± 0.5V
EnvironmentWorking Temp.-20 ~ +70°C
Working Humidity20 ~ 90% RH
Storage Temp., Humidity-20 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient± 0.03%/°C (0 ~ 45°C)(CH1)
Vibration10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety & EMCSafety StandardsUL60950-1, TUV EN60950-1 Approved
Withstand VoltageI/P-O/P: 3KVAC, I/P-FG: 2.0KVAC, O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25°C / 70% RH
EMC EmissionCompliance to EN55022 (CISPR22) Class B, EN61000-3-2, -3
EMC ImmunityCompliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, light industry level, criteria A
File Download
[DM] Two-way Radio - Aviation RPS-100
[DM] Two-way Radio - Aviation RPS-100

Catalog of aviation power supply RPS-100

Download

Aviation Power Supply | Wire Harness & Cable Assembly Manufacturer | Rexon

Based in Taiwan since 1990, Rexon Technology Co., Ltd. has been a manufacturer of two-way radios. It's main two-way radios include, Aviation Power Supply, Walkie Talkie, Aviation Radio, Professional Two-Way Radio, FRS Radio, DMR Two-Way Radio, Amateur Two-Way Radio, Two-Way Mobile Analog Radio, Marine VHF Two-Way Radio, Radio Accessories, Blue Tooth Products for Two-Way Radio, Electronic Control Board, PCB Assembly, Cable Assembly, Wire harnessand total solution for PCB Assembly with wire harness. We provide the whole PCBA procedures include SMT, DIP, Solder, assembly, and test finished products until shipments.

Established in 1990, Rexon Technology Co., Ltd has been in radio & wireless device manufacturing business for 30 years. Focusing on product design with high quality standards, we have built up strong OEM / ODM capabilities. In 2009, Rexon starts the new business-PCBA. We provide the whole PCBA procedures include SMT, DIP, Solder, assembly, and test finished products until shipments. in 2019, Rexon starts the new bussiness -Wire harness and cable assembly. Besides RF capability, our professional R&D team is experienced for customized software, hardware, and mechanical designs. Their competencies provide strong supports for comprehensive solutions for any technical demands.

Rexon has been providing customers with high quality two-way radio products since 1990, both with advanced technology and 30 years of experience, Rexon ensures that each customer's needs are met.