Aviation Power Amplifier | One-stop service for PCB Assembly Manufacturer | Rexon
Two-way Radio- Aviation Power Amplifier PA-10 is efficient and wide band capable.
It offers a nominal output of 14 watts output with 3 watts input drive on any frequency from 118 to 137 MHz. Rexon is a high-quality Aviation Power Amplifier, Airband PA manufacturer from Taiwan since 1990. In 2009, Rexon starts the new business-PCBA. We provide the whole PCBA procedures include SMT, DIP, Solder, assembly, and test finished products until shipments. in 2019, Rexon starts the new bussiness -Wire harness and cable assembly. Besides RF capability, our professional R&D team is experienced for customized software, hardware, and mechanical designs. Their competencies provide strong supports for comprehensive solutions for any technical demands. Established in 1990, Rexon Technology Co., Ltd has been in radio & wireless device manufacturing business for 30 years. Focusing on product design with high quality standards, we have built up strong OEM / ODM capabilities.
Aviation Power Amplifier
PA-10
Airband PA
Two-way Radio- Aviation Power Amplifier PA-10 is efficient and wide band capable.
It offers a nominal output of 14 watts output with 3 watts input drive on any frequency from 118 to 137 MHz.
An attractive and useful front panel and heat sink aluminum chassis gives everything for commercial operations and increasing receiver gain if required. PA-10 boosts your Air Band handheld to a powerful 14 Watts mobile/base. A built-in low noise GaAsFET receive preamplifier gives you 21 dB gain -- lets you strengthen weak signals.
The amplifier operates from 10.5 ~ 14.8 VDC power and requires about 10 ~ 13 amps of current at full output. SWR Protection prevents damage from antennas whipping in the wind. Reverse Polarity Protection can save your amplifier if you connect power backwards.
Features
- Automatic Fault for high SWR over 2:1.
- Built-in low-noise receive preamplifier, nominal 21 dB gain.
- RF sense keying (no PTT connector).
- Maximum 3W input, 14W output.
- SO-239 (UHF female) connectors.
- Permanently attached 24 in. (60cm) DC power cable, unterminated (tinned leads).
- DC Input: 13.8 Vdc @ 4A maximum at full output 14W (12.5 to 14.5 Vdc operational range).
- Dimensions (WHD): 4.921 x 1.969 x 8.268 in. (125 x 50 x 210mm).
- Weight: 2.5 lbs. (1.15 kg)
Specifications: Power Amplifier
| Parameter | Min | Typ. | Max. |
|---|---|---|---|
| Frequency Range | 118MHz | 137MHz | |
| Mode | Primarily AM, FM Allowed | ||
| RF Output Power (Carrier): | 12W | 14 Watt | |
| Input Power Range | 1 Watt | 1.5 | 3 Watt |
| DC Supply Voltage | 10.5 V | 12.5 V | 14.58 V |
| Transmit Supply Current | 4A | ||
| Receiver Preamplifier Gain: | 21dB | ||
| Receiver Preamplifier Noise Figure: | 1.9dB | ||
| RF Connector | UHF (SO-239) | ||
| Weight | 1.15 kG | ||
| Dimensions | H = 50mm, W = 125mm, L = 210mm | ||
- File Download
![[DM] Two-way Radio - Aviation PA-10](//resource.ready-market.com/media/48px/pdf.png)
![[DM] Two-way Radio - Aviation PA-10](http://resource.ready-market.com/media/48px/pdf.png)
Download 
Aviation Power Amplifier | Wire Harness & Cable Assembly Manufacturer | Rexon
Based in Taiwan since 1990, Rexon Technology Co., Ltd. has been a manufacturer of two-way radios. It's main two-way radios include, Aviation Power Amplifier, Walkie Talkie, Aviation Radio, Professional Two-Way Radio, FRS Radio, DMR Two-Way Radio, Amateur Two-Way Radio, Two-Way Mobile Analog Radio, Marine VHF Two-Way Radio, Radio Accessories, Blue Tooth Products for Two-Way Radio, Electronic Control Board, PCB Assembly, Cable Assembly, Wire harnessand total solution for PCB Assembly with wire harness. We provide the whole PCBA procedures include SMT, DIP, Solder, assembly, and test finished products until shipments.
Established in 1990, Rexon Technology Co., Ltd has been in radio & wireless device manufacturing business for 30 years. Focusing on product design with high quality standards, we have built up strong OEM / ODM capabilities. In 2009, Rexon starts the new business-PCBA. We provide the whole PCBA procedures include SMT, DIP, Solder, assembly, and test finished products until shipments. in 2019, Rexon starts the new bussiness -Wire harness and cable assembly. Besides RF capability, our professional R&D team is experienced for customized software, hardware, and mechanical designs. Their competencies provide strong supports for comprehensive solutions for any technical demands.
Rexon has been providing customers with high quality two-way radio products since 1990, both with advanced technology and 30 years of experience, Rexon ensures that each customer's needs are met.