Aviation Power Amplifier
Two-way Radio- Aviation Power Amplifier PA-10 is efficient and wide band capable.
It offers a nominal output of 14 watts output with 3 watts input drive on any frequency from 118 to 137 MHz.
An attractive and useful front panel and heat sink aluminum chassis gives everything for commercial operations and increasing receiver gain if required. PA-10 boosts your Air Band handheld to a powerful 14 Watts mobile/base. A built-in low noise GaAsFET receive preamplifier gives you 21 dB gain -- lets you strengthen weak signals.
The amplifier operates from 10.5 ~ 14.8 VDC power and requires about 10 ~ 13 amps of current at full output. SWR Protection prevents damage from antennas whipping in the wind. Reverse Polarity Protection can save your amplifier if you connect power backwards.
- Automatic Fault for high SWR over 2:1.
- Built-in low-noise receive preamplifier, nominal 21 dB gain.
- RF sense keying (no PTT connector).
- Maximum 3W input, 14W output.
- SO-239 (UHF female) connectors.
- Permanently attached 24 in. (60cm) DC power cable, unterminated (tinned leads).
- DC Input: 13.8 Vdc @ 4A maximum at full output 14W (12.5 to 14.5 Vdc operational range).
- Dimensions (WHD): 4.921 x 1.969 x 8.268 in. (125 x 50 x 210mm).
- Weight: 2.5 lbs. (1.15 kg)
Specifications: Power Amplifier
|Mode||Primarily AM, FM Allowed|
|RF Output Power (Carrier):||12W||14 Watt|
|Input Power Range||1 Watt||1.5||3 Watt|
|DC Supply Voltage||10.5 V||12.5 V||14.58 V|
|Transmit Supply Current||4A|
|Receiver Preamplifier Gain:||21dB|
|Receiver Preamplifier Noise Figure:||1.9dB|
|RF Connector||UHF (SO-239)|
|Dimensions||H = 50mm, W = 125mm, L = 210mm|
- Related Products
- File Download
Aviation Power Amplifier Manufacturer| Rexon
Located in Taiwan, Rexon Technology Co., Ltd. is a Aviation Power Amplifier | radio products manufacturer in communication network industry. Major radio product, including two-way radio, PCBA electronic control board, wire harnesses and so forth.
Rexon is your total solution supplier for radio and PCBA, providing complete PCBA procedures, including SMT, DIP, Solder, assembly, and finished product test and shipment, with factory manufacturing DMR Association certification. The elegant design appearance and complete functionality is delivered with superior quality.
Rexon has been offering customers high-quality radio products since 1990, both with advanced technology and 30 years of experience, Rexon ensures each customer's demands are met.